Comparison of various silica‐based monoliths for the analysis of large biomolecules†

In the present study, three types of silica‐based monoliths, i.e. the first and second generations of commercial silica monolithic columns and a wide‐pore prototype monolith were compared for the analysis of large biomolecules. These molecules possess molecular weights between 1 and 66 kDa. The gradient kinetic performance of the first‐generation monolith was lower than that of the second generation, for large biomolecules (>14 kDa) but very close with smaller ones (1.3–5.8 kDa). In contrast, the wide‐pore prototype column was particularly attractive with proteins larger than 19 kDa (higher peak capacity). Among these three columns, the selectivity and retention remained quite similar but a possible larger number of accessible and charged residual silanols was noticed on the wide‐pore prototype material, which led to unpredicted small changes in selectivity and slightly broader peaks than expected. The peak shapes attained with the addition of 0.1% formic acid in the mobile phase remained acceptable for MS coupling, particularly for biomolecules of less than 6 kDa. It was found that one of the major issues with all of these silica‐based monoliths is the possible poor recovery of large biomolecules (principally with monoclonal antibody fragments of more than 25 kDa).     

SMFs-supported Pd nanocatalysts in selective acetylene hydrogenation: Pore structure-dependent deactivation mechanism

In the present study, CNFs, ZnO and Al₂O₃ were deposited on the SMFs panels to investigate the deactivation mechanism of Pd-based catalysts in selective acetylene hydrogenation reaction. The examined supports were characterized by SEM, NH₃-TPD and N₂ adsorption-desorption isotherms to indicate their intrinsic characteristics. Furthermore, in order to understand the mechanism of deactivation, the resulted green oil was characterized using FTIR and SIM DIS. FTIR results confirmed the presence of more unsaturated constituents and then, more branched hydrocarbons formed upon the reaction over alumina-supported catalyst in comparison with the ones supported on CNFs and ZnO, which in turn, could block the pores mouths. Besides the limited hydrogen transfer, N₂ adsorption-desorption isotherms results supported that the lowest pore diameters of Al₂O₃/SMFs close to the surface led to fast deactivation, compared with the other catalysts, especially at higher temperatures.     

Carbon/carbon supercapacitors

Supercapacitors, or electrochemical capacitors, are a power storage system applied for harvesting energy and delivering pulses during short periods of time. The commercially available technology is based on charging an electrical double-layer (EDL), and using high surface area carbon electrodes in an organic electrolyte. This review first presents the state-of-the-art on EDL capacitors, with the objective to better understand their operating principles and to improve their performance. In particular, it is shown that capacitance might be enhanced for carbons having subnanometric pores where ions of the electrolyte are distorted and partly desolvated. Then, strategies for using environment friendly aqueous electrolytes are presented. In this case, the capacitance can be enhanced through pseudo-faradaic contributions involving i) surface functional groups on carbons, ii) hydrogen electrosorption, and iii) redox reactions at the electrode/electrolyte interface. The most promising system is based on the use of aqueous alkali sulfate as electrolyte allowing voltages as high as 2 V to be reached, due to the high overpotential for di-hydrogen evolution at the negative electrode.     

碱液后处理对纳米ZSM-5沸石孔道和酸度的影响

采用XRD、N2物理吸附、NH3-TPD以及TEM、IR和NMR手段,系统研究了NaOH碱液后处理对低硅铝比纳米ZSM-5沸石(Si/Al摩尔比为14.5、晶粒度为20～50 nm)孔道和酸度的影响.结果表明,在碱液中,低硅铝比纳米ZSM-5沸石主要发生限域脱硅,而且低硅铝比纳米ZSM-5沸石的碱液脱硅难度大于高硅铝比沸石.但在适当的碱液处理条件下(碱硅比为0.19～0.35,温度为60～80℃,处理时间为2～5 h)可以在其晶体内产生大量介孔,增加比表面积和孔容;同时增加弱酸和中强酸的浓度,并提高L酸比例.L酸的大量增加主要是由于产生了裸露的骨架铝(≡Alδ+),这与文献的观点有所不同.     

无外加酸体系中高温合成Al-SBA-15

在无外加酸的体系中,以三嵌段共聚物P123为模板剂,一步合成有序介孔材料Al-SBA-15。考查了高温和硅/铝源物种共水解对产物形貌和结构性质的影响。XRD,N₂吸附脱附,IR,SEM,TEM等结果表明,在无外加酸的体系中,升高晶化温度至423 K促使Al-SBA-15的短棒状颗粒分散、卷曲成环状。与较低晶化温度下得到的样品对比,孔径增大,比表面积明显降低。当晶化温度低于423 K,样品铝含量基本保持不变。研究还发现,硅源/铝源物种共水解时间超过20 h后,所得样品中铝含量明显降低。     

金属-有机框架材料孔结构的初步理论评估

金属-有机框架材料在气体吸附/分离方面具有广泛的应用, 因而引起国内外学者的广泛关注。本文以6种代表性的MOFs为例简单介绍了利用理论工具研究MOFs孔结构的方法。     

Matching energy of unicyclic and bicyclic graphs with a given diameter

Gutman and Wagner proposed the concept of matching energy (ME) and pointed out that the chemical applications of ME go back to the 1970s. Let G be a simple graph of order n and be the roots of its matching polynomial. The ME of G is defined to be the sum of the absolute values of . In this article, we characterize the graphs with minimal ME among all unicyclic and bicyclic graphs with a given diameter d. © 2014 Wiley Periodicals, Inc. Complexity 21: 224–238, 2015     

Study of Bimodal Drop Size Distributions of Emulsion

In order to increase the present understanding of bimodal emulsion drop size distributions, systematic series of experiments have been carried out to investigate the effects of formulation variables on bimodal drop size distributions, and probability distribution functions were proposed to analyze the distribution. The results show that, the span of the drop size and Sauter mean diameter become larger when the dispersed phase volume fraction becomes higher and rotor speed becomes lower; the Frechet function represents the experimental data satisfactorily. The prediction model of Sauter mean diameter established by combining the prediction theory of the maximum stable drop diameter and experimental analysis results can fit the experimental data well.     

微生物发酵诱导多孔材料: 制备方法和应用

微生物发酵作为一种新的制备多孔材料的方式, 将微生物发酵工程与发泡工程有机结合起来, 克服了传统制备方法需要特殊设备、 操作复杂、 后处理繁琐、 化学药品污染和成本昂贵等缺点, 受到了广泛关注.本文基于微生物发酵多孔材料的研究, 围绕多孔材料的定义和多孔水凝胶的分类及制备方式进行总结.针对微生物发酵诱导制备多孔材料的制备方法, 综合评述了该方法在染料吸附、 海水蒸发脱盐、 电磁屏蔽以及制备新型功能性生物材料等方面的应用.最后, 对微生物诱导制备多孔材料的未来发展进行了展望.     

Continuous Porous Aromatic Framework Membranes with Modifiable Sites for Optimized Gas Separation

Continuous microporous membranes are widely studied for gas separation, due to their low energy premium and strong molecular specificity. Porous aromatic frameworks (PAFs) with their exceptional stability and structural flexibility are suited to a wide range of separations. Main-stream PAF-based membranes are usually prepared with polymeric matrices, but their discrete entities and boundary defects weaken their selectivity and permeability. The synthesis of continuous PAF membranes is still a major challenge because PAFs are insoluble. Herein, we successfully synthesized a continuous PAF membrane for gas separation. Both pore size and chemistry of the PAF membrane were modified by ion-exchange, resulting in good selectivity and permeance for the gas mixtures H₂/N₂ and CO₂/N₂. The membrane with Br^? as a counter ion in the framework exhibited a H₂/N₂ selectivity of 72.7 with a H₂ permeance of 51844 gas permeation units (GPU). When the counter ions were replaced by BF₄^?, the membrane showed a CO₂ permeance of 23058 GPU, and an optimized CO₂/N₂ selectivity of 60.0. Our results show that continuous PAF membranes with modifiable pores are promising for various gas separation situations.